33# Iso Type Polyester Gelcoat

1. Properties

Iso type polyester gelcoat. It gives good mechanical properties, impact resistance, waterproof, and weather reliability. It is recommended for the manufacture of common products. It is suitable for spraying or hand lay-up.

2. Specification & Application

Specification 33# Test Standard
Viscosity 25°C cp 3500-5500 GB7193.1-1987
Gel Time 25°C min 10-20 GB7193.6-1987
Flexible Strength MPa 130 GB/T2570-1995
Flexible Modulus GPa 3.2 GB/T2570-1995
Tensile Strength MPa 68 GB/T2568-1995
Tensile Modulus GPa 3.2 GB/T2568-1995
Elongation % 3.0 GB/T2568-1995
Impact Strength KJ/m² 13 GB/T2571-1995
Barcol Hardness 38 GB3854-83
HDT °C 58 GB1634-1979

Application

  • Cure-system: Cobalt type accelerator, MEKP
  • Application:
    1. Temperature of workshop, raw materials and mould should be above 15°C and relative humidity below 70%;
    2. Spraying or hand lay-up.
  • Note:
    1. There are transparency, white and other varied colors, referred to RAL color card.
    2. Colour gelcoat is promoted.

3. Package, Storage & Transportation

  • PACKAGE: 20kg pails
  • STORAGE: maximum of 3 months under 25°C in shade
How can I get a sample?2024-07-17T06:56:11+00:00

We provide small samples free of charge, but you will need to cover the shipping costs.

Are you able to adjust the formula to meet our requirement?2024-07-17T06:59:11+00:00

We have our own technical department. After you test the sample, please provide us with your detailed requirements. We can adjust the resin accordingly to enhance the properties of your finished products.

What is the lead time for mass production?2024-07-17T07:00:10+00:00

Honestly, it depends on the quantity. We will do our best to create a production plan based on your estimated time of arrival (ETA).

What are your terms of payment?2024-07-17T07:01:14+00:00

For the first trial order, we require 100% payment upfront. For subsequent orders, we ask for 30% payment in advance and 70% payment after the buyer receives the B/L copy. We also accept L/C if needed.

Typical Processing

7e952624d967693

Pultrusion

Pultruded Grating, Tent Poles, Solid Rod, Flat Strip, Square Tube, Hollow Round Tube.

88a141757a541c1

SMC/BMC

Insulating FRP Parts (Low Voltage), FRP Plates for Water Tanks, FRP Insulators (High Voltage), Sanitary Ware and Auto Parts

62d6a9e6d956b56

Solid surface

Solid Surface And Artificial Marble Resins, Engineered Stone, Quartz Stone, Granite.

2026a4e7c09b4db

Hand Lay-up

Chemical Resistance, Tanks & Pipes Resin

Go to Top