ALITA 1598 – Versatile Resin for Efficient Injection/Molding of BMC and SMC Sheets

Note: SPI: Alita BPO-50F at 2%

Physical Properties of SMC Moulded Plastic (for reference only):

Note:

1. The casting method follows GB/T 8237, with the curing system: 0.6% Co-Naphthenate 1%, Nouryon M-50 1%.
2. Post-casting curing treatment: Room temperature × 24 hours + 60℃ × 3 hours + 110℃ × 2 hours.

Handling and Storage:

During transportation, it should comply with the national “Regulations on the Safe Management of Chemical Dangerous Goods,” Chapter 5 on the transportation and handling of chemical dangerous goods. It should be stored in a cool, ventilated indoor area below 25°C, away from sources of ignition, heat, and radiation. The container should be kept sealed, protected from moisture and sunlight, and stored separately from oxidizers, acids, and bases. Under these packaging, transportation, and storage conditions, the storage period is 6 months (for resin with accelerators, the storage period is 3 months). If the storage temperature is higher (up to 30°C), the storage period should not exceed 3 months (for resin with accelerators, the storage period should not exceed 1.5 months).