ALITA 7016 – High-Performance Pultrusion Resin for Superior Pultruded Products

Principal Properties & Application:

• Excellent Wetting Properties: Ensures thorough impregnation of reinforcements, such as pultruded fiberglass, creating a strong bond for superior composite properties.
• High Reactivity: Facilitates fast curing times, enabling efficient production cycles, especially in continuous pultrusion processes.
• Fast Curing: Improves productivity and reduces energy consumption during the pultrusion process.
• Superior Thermal Strength: ALITA 7016 yields pultruded composites with a high heat deflection temperature, suitable for high-temperature applications.
• Outstanding Mechanical Properties: Imparts high strength, high modulus, high hardness, and good toughness to pultruded products, meeting diverse performance needs.

• Pultrusion Molding
• Pultrusion Processes
• High-Speed Pultrusion Lines

Liquid resin technical indicators:

Note: When testing the cure performance of SPI (Structural Polyurethane Injection) system, the curing agent used is Enox BPO-50F with a dosage of 2%.

Physical properties of the casting (for reference only):

Note: The method of producing the casting body shall be carried out in accordance with standard Q/320411 BES002-2014.

Usage instructions:

1. The ALITA 7016 resin does not contain wax, promoters, or thixotropic agents.
2. For the curing system in the extrusion process, it is recommended to use BPO curing agent at a concentration of 0.5-2.0% and TBPB curing agent at a concentration of 0.5-1.5%. The actual selection should be based on specific equipment, products, process temperature, extrusion speed, and other factors. To reduce shrinkage when producing thick-walled products, it is advisable to add low-shrinkage additives.
3. For applications requiring higher heat resistance and resistance to seawater, it is recommended to choose ALITA 239 resin, which is a benzene-based resin. For applications requiring higher anti-corrosion performance, it is recommended to choose ALITA 901 resin, which is an epoxy vinyl-based resin.

Handling and Storage:

This resin contains ingredients which could be harmful if mishandled. Contact with skin and eyes should be avoided and necessary protective equipment and clothing should be worn.
Drums – It is highly recommended that all material is stored at stable temperatures below 25°C (77°F). Avoid exposure to heat sources such as direct sunlight or steam pipes. To avoid contamination of product with water, do not store outdoors. Keep sealed to prevent moisture pick-up and monomer loss. Rotate stock.