P321 Series Plate Gelcoat

1. Properties

It is UP gelcoat specially used for manufacturing big flat laminates such as coach composite sheeting and big table panels. The series gelcoats have excellent mechanical properties (high flexible strength, impact strength, high elongation), good processing properties (good leveling, no drainage, versatile processing suitability), high glossiness, good weather resistance, and high toughness. There are different varieties and specifications suitable for different processing technologies.

2. Specification & Application

Specification	P321-H	P321-C	P321-S
Viscosity 25°C cp	3000-5000	500-2000	1600-2000
Gel Time 25°C min	8-20	8-20	8-20
Flexible Strength MPa	110	110	110
Flexible Modulus GPa	3.2	3.2	3.2
Tensile Strength MPa	68	68	68
Tensile Modulus GPa	3.2	3.2	3.2
Elongation %	3	5	5
Impact Strength KJ/m²	15	15	15
Barcol Hardness	38	38	38
HDT °C	60	60	60

Application

Cure-system: Promoted, MEKP; MEKP, Accelerator; Promoted, MEKP
Application:
- Brush coating
- Curtain coating
- Spray coating
Note:
1. There are transparency, white, and other varied colors, referred to RAL color card.
2. Colour gelcoat is promoted.

3. Package, Storage & Transportation

PACKAGE: 20kg pails
STORAGE: maximum of 3 months under 25°C in shade

How can I get a sample?alita2024-07-17T06:56:11+00:00

How can I get a sample?

We provide small samples free of charge, but you will need to cover the shipping costs.

Are you able to adjust the formula to meet our requirement?alita2024-07-17T06:59:11+00:00

Are you able to adjust the formula to meet our requirement?

We have our own technical department. After you test the sample, please provide us with your detailed requirements. We can adjust the resin accordingly to enhance the properties of your finished products.

What is the lead time for mass production?alita2024-07-17T07:00:10+00:00

What is the lead time for mass production?

Honestly, it depends on the quantity. We will do our best to create a production plan based on your estimated time of arrival (ETA).

What are your terms of payment?alita2024-07-17T07:01:14+00:00

What are your terms of payment?

For the first trial order, we require 100% payment upfront. For subsequent orders, we ask for 30% payment in advance and 70% payment after the buyer receives the B/L copy. We also accept L/C if needed.

Typical Processing

Pultrusion

Pultruded Grating, Tent Poles, Solid Rod, Flat Strip, Square Tube, Hollow Round Tube.

SMC/BMC

Insulating FRP Parts (Low Voltage), FRP Plates for Water Tanks, FRP Insulators (High Voltage), Sanitary Ware and Auto Parts

Solid surface

Solid Surface And Artificial Marble Resins, Engineered Stone, Quartz Stone, Granite.

Hand Lay-up

Chemical Resistance, Tanks & Pipes Resin